四苯硼酸盐的热化学研究——Ⅱ.一价四苯硼酸盐的标准生成焓

本文用自行建立的精密溶解层热装(?)测定了298.15K时,NH_4BPh_4、KBPH_4、RbBPh_4、CsBPh_4、TlBPh_4、AgBPh_4和HgPh_2七种沉淀反应的反应焓,由此计算了一价四苯硼酸盐的标准生成焓、熵及吉布斯自由能.     

Thermochemistry of the solid complex Gd(Et<Subscript>2</Subscript>dtc)<Subscript>3</Subscript>(phen)

Summary A ternary solid complex Gd(Et₂dtc)₃(phen) has been obtained from reactions of sodium diethyldithiocarbamate (NaEt₂dtc), 1,10-phenanthroline (phen) and hydrated gadolinium chloride in absolute ethanol. The title complex was described by chemical and elemental analyses, TG-DTG and IR spectrum. The enthalpy change of liquid-phase reaction of formation of the complex, Δ_rH^Θ_m(l), was determined as (-11.628±0.0204) kJ mol^-1 at 298.15 K by a RD-496 III heat conduction microcalorimeter. The enthalpy change of the solid-phase reaction of formation of the complex, Δ_rH^Θ_m(s), was calculated as (145.306±0.519) kJ mol^-1 on the basis of a designed thermochemical cycle. The thermodynamics of reaction of formation of the complex was investigated by changing the temperature of liquid-phase reaction. Fundamental parameters, the apparent reaction rate constant (k), the apparent activation energy (E), the pre-exponential constant (A), the reaction order (n), the activation enthalpy (Δ_rH^Θ_≠), the activation entropy (Δ_rS^Θ_≠), the activation free energy (Δ_rG^Θ_≠) and the enthalpy (Δ_rH^Θ_≠), were obtained by combination of the thermodynamic and kinetic equations for the reaction with the data of thermokinetic experiments. The constant-volume combustion energy of the complex, Δ_cU, was determined as (-18673.71±8.15) kJ mol^-1 by a RBC-II rotating-bomb calorimeter at 298.15 K. Its standard enthalpy of combustion, Δ_cH^Θ_m, and standard enthalpy of formation, Δ_fH^Θ_m, were calculated to be (-18692.92±8.15) kJ mol^-1 and (-51.28±9.17) kJ mol^-1, respectively.     

Traceability of (values carried by) reference materials

 Traceability is a property of the result of a measurement. Since values carried by (reference) materials must also have been obtained, of necessity, by measurement, the definition of traceability also applies to reference materials. It is extremely helpful to give the traceability (of the origin) of a reference material a separate name, i.e. 'trackability'. An analysis of the function of values carried by reference materials, shows that they can fulfill different functions, depending on the intended use. One of the functions located outside the traceability chain – and hence not very relevant for establishing traceability – is evaluating the approximate size of the uncertainty of the measurement of an unknown sample by performing a similar measurement on a reference material, used as a 'simulated sample'. Another function is located inside the traceability chain, where the reference material is used as an added 'internal standard'. Then, the value carried by the reference material is essential for establishing the traceability of the measured value of an unknown sample. In the latter application, the reference material acts as an 'amount standard' (the certified value for amount is used). Received: 11 November 1999 / Accepted: 24 February 2000     

诱导效应指数与含硫含氮的低碳直链有机化合物的标准汽化热

本文利用诱导效应指数建立了含硫含氮的低碳直链有机物的标准汽化热的简单估算方法，我们利用此法计算了一些含硫含氮的直链有机物的标准汽化热，４１个可比较值的相对误差均在５％以内。     

标准气体在检测可燃气体报警器中的重要性

介绍可燃气体报警器的检测现状，分析可燃气体报警器检测元件中毒的原因，强调了检测可燃气体报警器时使用标准气体的重要性，以及标准气体的正确使用。     

CaClH2PO4·H2O的合成及其性质的研究

本文介绍了CaClH_2PO_4·H_2O的合成和纯化的方法。用精密量热计系统测定了CaClH_2PO_4·H_2O的标准生成焓在298.15K时为-2282.34kJ mol~(-1)。评述和讨论了热分解反应的化学动力学性质,测定了分解反应的级数和表现活化能。     

Simple method for the determination of rosiglitazone in human plasma using a commercially available internal standard

To the best of our knowledge, bioanalytical methods to determine rosiglitazone in human plasma reported in literature use internal standards that are not commercially available. Our purpose was to develop a simple method for the determination of rosiglitazone in plasma employing a commercially available internal standard (IS). After the addition of celecoxib (IS), plasma (0.25 mL) samples were extracted into ethyl acetate. The residue after evaporation of the organic layer was dissolved in 750 microL of mobile phase and 50 microL was injected on to HPLC. The separation was achieved using a Hichrom KR 100, 250 x 4.6 mm C(18) with a mobile phase composition potassium dihydrogen phosphate buffer (0.01 m, pH 6.5):acetonitrile:methanol (40:50:10, v/v/v). The flow-rate of the mobile phase was set at 1 mL/min. The column eluate was monitored by fluorescence detector set at an excitation wavelength of 247 nm and emission wavelength of 367 nm. Linear relationships (r(2) > 0.99) were observed between the peak area ratio rosiglitazone to IS vs rosiglitazone concentrations across the concentration range 5-1000 ng/mL. The intra-run precision (%RSD) and accuracy (%Dev) in the measurement of rosiglitazone were <+/-10.69 and <-12.35%, respectively across the QC levels (50-1000 ng/mL). The extraction efficiency was >80% for both rosiglitazone and IS from human plasma. The lower limit of quantitation of the assay was 5 ng/mL. In summary, the methodology for rosiglitazone measurement in plasma was simple, sensitive and employed a commercially available IS.     

Thermal decomposition of surface compounds for the generation of small quantities of acetaldehyde: Calibration of a thermal desorption-gas chromatography-flame ionization detection

The paper presents a new method for the generation of acetaldehyde in the amounts that allow to calibrate the measuring system. The method is based on thermal decomposition of surface compounds at the range 130-190 °C, in which an acetaldehyde as the decomposition product is released. The synthetic pathway leading to the desired surface compounds is described. Investigations demonstrated that the synthesis of the compounds on the surface of the support material (silica gel) was carried out homogeneously. The technique proposed was used for the generation of gaseous standard mixtures containing acetaldehyde for the calibration of a thermal desorber-gas chromatograph-flame ionization detector system.     

Determination of the apparent standard potential of the Dy/Dy(Ⅲ) system in the LiCl-KCl eutectic

The apparent standard potential of Dy/Dy(III) system in the LiCl-KCl eutectic has been determined by the logarithmic analysis of the semi-integrals of voltammograms, logarithmic analysis of chronopotentiograms and the open circuit potentiometry. The dysprosium equilibrium potentiab for various concentration of dysprosium chloride in the LiCl-KCl eutectic melt between 400-500℃ were first determined experimentally, and the apparent standard potential of this system and its temperature dependance have been calculated.     

Symmetry numbers and chemical reaction rates

This article shows how to evaluate rotational symmetry numbers for different molecular configurations and how to apply them to transition state theory. In general, the symmetry number is given by the ratio of the reactant and transition state rotational symmetry numbers. However, special care is advised in the evaluation of symmetry numbers in the following situations: (i) if the reaction is symmetric, (ii) if reactants and/or transition states are chiral, (iii) if the reaction has multiple conformers for reactants and/or transition states and, (iv) if there is an internal rotation of part of the molecular system. All these four situations are treated systematically and analyzed in detail in the present article. We also include a large number of examples to clarify some complicated situations, and in the last section we discuss an example involving an achiral diasteroisomer.